9
Rev 04-2009
SERVICE MANUAL
4- DISASSEMBLING
4-1 COVER REMOVAL
BEFORE ANY INTERVENTION on the AVISO unplug the mains cord
at its back. Remove all connections.
To remove the cover:
- Remove the power button (front face) and the button allows the fixing
of the probe holder (rear face)
- Unscrew the 8 screws on the bottom face (see below).
- Unscrew the 2 screws on the rear face (see below).
- Remove with care the cover, by pulling it.
- Put the cover and the back on a soft material to protect the cover
paint.
- Remove the rear plate.
- Proceed reverse to re-mount the cover.
2 screws
(M3x20)
Bottom view
2 screws
(M3x20)
Rear view
2 screws
(M3x10)
Rear plate
4 screws
(M3x6)
Summary of Contents for Aviso
Page 2: ......
Page 8: ...8 Rev 04 2009 SERVICE MANUAL 3 OVERALL BLOCK DIAGRAM ...
