QUANTA S100-L11SL, User Manual

Page: 27 / 36

S
AFETY
I
NFORMATION
P
OWER AND
E
LECTRICAL
W
ARNINGS
3
-4
Power and Electrical Warnings
Power Cord Warnings
If an AC power cord was not provided with your product, pur-
chase one that is approved for use in your country.
CAUTION!
T
HE POWER BUTTON
,
INDICATED BY THE STAND
-
BY POWER MARK
-
ING
, DOES NOT
COMPLETELY TURN OFF THE SYSTEM
AC
POWER
,
5V
STANDBY POWER IS ACTIVE WHENEVER THE SYSTEM IS
PLUGGED IN
. T
O REMOVE POWER FROM SYSTEM
,
YOU MUST
UNPLUG THE
AC
POWER CORD FROM THE WALL OUTLET
. Y
OUR
SYSTEM MAY USE MORE THAN ONE
AC
POWER CORD
. M
AKE SURE
ALL
AC
POWER CORDS ARE UNPLUGGED
. M
AKE SURE THE
AC
POWER CORD
(
S
)
IS
/
ARE UNPLUGGED BEFORE YOU OPEN THE
CHASSIS
,
OR ADD OR REMOVE ANY NON HOT
-
PLUG COMPONENTS
.
CAUTION!
D
O NOT ATTEMPT TO MODIFY OR USE AN
AC
POWER CORD IF IT IS
NOT THE EXACT TYPE REQUIRED
. A
SEPARATE
AC
CORD IS
REQUIRED FOR EACH SYSTEM POWER SUPPLY
.
CAUTION!
S
OME POWER SUPPLIES IN SERVERS USE
N
EUTRAL
P
OLE
F
USING
.
T
O AVOID RISK OF SHOCK USE CAUTION WHEN WORKING WITH
POWER SUPPLIES THAT USE
N
EUTRAL
P
OLE
F
USING
.
CAUTION!
T
HE POWER SUPPLY IN THIS PRODUCT CONTAINS NO USER
-
SER
-
VICEABLE PARTS
. D
O NOT OPEN THE POWER SUPPLY
. H
AZARDOUS
VOLTAGE
,
CURRENT AND ENERGY LEVELS ARE PRESENT INSIDE THE
POWER SUPPLY
. R
ETURN TO MANUFACTURER FOR SERVICING
.
!
!
!
!
CAUTION!
W
HEN REPLACING A HOT
-
PLUG POWER SUPPLY
,
UNPLUG THE
POWER CORD TO THE POWER SUPPLY BEING REPLACED BEFORE
REMOVING IT FROM THE SERVER
.
CAUTION!
W
HEN REPLACING A HOT
-
PLUG POWER SUPPLY
,
UNPLUG THE
POWER CORD TO THE POWER SUPPLY BEING REPLACED BEFORE
REMOVING IT FROM THE SERVER
.
CAUTION!
T
O AVOID ELECTRICAL SHOCK OR FIRE
,
CHECK THE POWER CORD
(
S
)
THAT WILL BE USED WITH THE PRODUCT AS FOLLOWS
:

Do not attempt to modify or use the AC power cord(s) if they
are not the exact type required to fit into the grounded elec-
trical outlets.

The power cord(s) must meet the following criteria: The
power cord must have an electrical rating that is greater than
that of the electrical current rating marked on the product.
CAUTION!
T
HE POWER CORD MUST HAVE SAFETY GROUND PIN OR CONTACT
THAT IS SUITABLE FOR THE ELECTRICAL OUTLET
.
!
!
!
!