background image

BIOS

A

DVANCED

 S

CREEN

 

3-21

Intel TXT(LT-SX) Screen

Intel TXT(LT-SX) Configuration Screen

SAS Port 7

Information only. 
Displays the device 
on SAS Port 7. 
Only displayed 
when PCH SKU + 
upgrade ROM sup-
ports 8 SCU ports.

SAS Configuration Fields (Continued)

S

ETUP

 I

TEM

O

PTIONS

H

ELP

 T

EXT

C

OMMENTS

Intel TXT(LT-SX) Configuration Fields

S

ETUP

 I

TEM

O

PTIONS

H

ELP

 T

EXT

C

OMMENTS

CPU: TXT 
Feature

Information only. 
Displays the CPU: 
TXT Feature.

Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

Recovery

Main

Chipset

Server Mgmt

Boot

Security

Save & Exit

   : Select Screen

   : Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F8: Previous Value

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Intel TXT(LT-SX) Hardware Support

CPU: TXT Feature

Chipset: TXT Feature

Intel TXT(LT-SX) Configuration

 TXT Support

Intel TXT(LT-SX) Dependencies

The following must be supported and enabled.

 VT-d Support

 VT Support

 TPM Support

 TPM State

Supported

Supported

Disabled

Disabled

Enabled

Disabled

Disabled

Summary of Contents for STRATOS S400-X44E




























































































































































































































































Reviews: