Quanta Computer QOCA, User Manual

Page: 31 / 75

CIB418-01 30
3. Attach the ECG sensor to the front of the sensor
holder so that all four holder connectors on the
sensor are properly clicked into the four sensor
connectors on the holder (see image below).
NOTE: Once connected, the status indicator on the
sensor will light green then slowly flash indicating that
the sensor is connected to the holder but that the
holder has not properly made contact with a body.
4. Remove the paper backing on the contact side of
each of the ECG electrodes.
5. Adhere the 2 electrodes located near the sensor
under your left pectoral area (see image below).
NOTE: The electrodes feature adhesive on the
contact side to ensure secure contact with your body.
If an electrode does not adhere securely, please
replace it with a new electrode.