17
17
8. Regulator parameters display
8.1.Information about the device
ІInformation about the device is displayed for the first seconds
after the power supply to the voltage regulator. In the first line the
name (QUANT I or QUANT II) and power of model are displayed.
QUANT I or «Small model»
is a model with smaller size and
weight. List of capacities: 5,5 kW, 7 kW, 8,8 kW. Dimensions: 435
mm х 250 mm х 125 mm.
The second line contains service information, needed only so
that the user can pass it to the service in case of problems (for
consultations about screens and variables if they differ from
those described here)
.
8.2. First level menu screens and second level menu screens
There are two types of menus in the voltage regulator: the first
level menu and the second level menu
First level menu screens:
are available as soon as the device is turned on. They are switched
with the "Left" and "Right" buttons below the screen (left and right
buttons). Information screens without settings.
• MAIN SCREEN
It is displayed by default when you turn on the device.
In the first line from left to right: input voltage, in Volts; the per-
centage of load from the maximum possible power at current
voltage and output power; output voltage in Volts and tenths of
a Volt.
In the second line from left to right: input current, in Amperes;
output power, in kilowatts; output current, in Amperes.
• ADDITIONAL SCREEN NO.1
Displayed after pressing the "Right" button once.
From left to right: input voltage, in Volts; the percentage of load
from the maximum possible power at the current input voltage;
output voltage in Volts and tenths of a Volt.
• ADDITIONAL SCREEN NO.2
Displayed after double-pressing the “Right” button.
160V 87% 220.2V
21A 14.2kW 18A
160V
25C
220.2V
21A 14.2kW 18A
In ####### Out
160V
25C
220.2V
QUANT-9
Automatic voltage regulator, one-phase
