QuanSheng TG-45UV, User Manual

Page: 29 / 35

FUNCTION OPERATION AND DESCRIPTION FUNCTION OPERATION AND DESCRIPTION
Jacklight
This function is suitable for night lighting and warning light.
Tap key MON to turn on night lighting.Operate it again to turn on warning light.
Operate it again to turn it off.
Monitor（MON）
In the same frequency mode, it can monitor signal from the others.
Press MON key for more than 2s to turn it on. Release MON key to turn it off.
Channel/Frequency Mode Conversion（VF0/MR）
Tap VFO/MR key to switch between channel and frequency mode.
TX 1750Hz Call Tone
Press key PTT+BAND to send 1750Hz call tone (This function is for the repeater of European market) .
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Cable Clone（COPING）
This function can copy one radio ’ s information to another one.
1. Connect with the main-radio and sub-radio by cloning cable.
2. Press and hold MON to turn the radio on, the LCD displays: COPING. The red light of main-radio
glitter and the green light of sub-radio glitter
3. When the red and green light do not glitter, the LCD of sub-radio displays:
or r it means it successed in cloning.
The operation steps are as follows：
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Reverse Function（ R ）
When you set different frequencies, tapping“*”key can shift the transmitting and receiving
frequency, the LCD displays:
1. As above picture the receiving frequency of channel A is 420.875MHz, the transmitting frequency
frequency is 425.875MHz.
2. Tap“*”key, the receiving frequency is changed to 425.875MHz, the transmitting frequency
is changed to 400.875MHz, the LCD displays:
The operation steps are as follows:
This function can scan the frequency activity from other radios.
The operation steps are as follows:
!
NOTE
This function is invalid in the same frequency.
⊙
Frequency Scanning
1. In frequency mode, press key“*” for more than 2s, it will frequency scan according
to setted step frequency.
2. Press key ▲ or ▼ to change the direction of scanning.
3. Press any key to confirm after scanning the signal.
! NOTE
Scanning mode see Menu No.18
⊙
45UV
WELCOME
400.875
136.225
R
425.875
136.225
R
47 48