QuanSheng TG-45UV, User Manual

Page: 18 / 35

FUNCTION OPERATION AND DESCRIPTION FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Receiving DCS（R--DCS）——Menu No.10
1. In frequency mode, press Menu+10, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose. The LCD displays:
OFF: OFF
R-DCS：D023N-D754N（Normal DCS）
R-DCS：D023I-D754I（Inverse DCS）
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
Using this function can set your privacy and prevent disturbance from others or match with the code
of other radios.
The operation steps are as follows:
NOTE
!
There are 208 groups of
normal and inverse DCS
in this radio.【see attached
list (2)】This function is invalid
in channel mode.
⊙
NOTE
!
There are 50 groups of CTCSS.【see attached list (1)】. This function is invalid in channel mode.
⊙
Receiving CTCSS（R--CTCS）——Menu No.11
1. In frequency mode, press Menu+11, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose from 67.0—254.1Hz.The LCD displays:
CTCSS：67.0—254.1Hz， OFF： OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
The LCD displays:
Using this function can set your privacy and prevent disturbance
from others or match with the code of other radios.
The operation steps are as follows:
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Keypad Sound Reminding（BEEP）——Menu No.8
1. In frequency or channel mode, press Menu+8, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose ON, the LCD displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function is to set the reminding sound. It will beep when you press keypad.
The operation steps are as follows:
Time-Out-Timer（TOT）—— M enu No.9
1. In frequency or channel mode, press Menu+9, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose 15s, The LCD displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function is to limit the calling time, the radio will stop transmitting and then launch voice if
it transmits over setted time.
Example, if you want to set time limit for 15s. The operation steps are as follows:
8
BEEP
OFF
8
BEEP
ON
9
TOT
15
9
TOT
OFF
10
R-DCS
OFF
10
R-DCS
D023N
400.875
136.225
DCS
11
R-CTCS
OFF
11
R-CTCS
67.0Hz
400.875
136.225
CT
27 28