FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
!
NOTE
Pls check the channel you store
has the original channel or not,
if does, you need to delete it
before channel storing. (Channel
delete see Menu No.28)
⊙
a. In frequency mode, input number 4, 6, 5, 8, 7, 5.
b. Press Menu+11, the LCD displays:
c. Press key Menu, and then press key ▲ or ▼ to adjust to 71.9 Hz, the LCD displays:
d. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.The LCD
displays:
e. Press key Menu+13, the LCD displays:
f. Press key Menu, and then press key ▲ or ▼ to adjust to 71.9 Hz，the LCD displays:
g. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The
LCD displays:
h. Press Menu+27. the LCD displays:
i. Press key Menu, and then press ▲ 001 channel or input number 0, 0, 1 directly, the LCD displays:
j. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
k. Press key VFO/MR to channel mode, display modes see Menu No.21 and Menu No.22.
First, storing channel 1：
a. In frequency mode, input number 4, 6, 5, 5, 7, 5.
b. Press Menu+13, the LCD displays:
c. Press key Menu, and then press key ▲ or ▼ to adjust to 88.5 Hz，the LCD displays:
d. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.After transmitting, the
LCD displays:
e. Press Menu+25, the LCD displays:
f. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
g. After setting, press key Menu to confirm, and then press key PTT or Exit to standby. The
LCD displays:
h. Press Menu+26, the LCD displays:
i. Press key Menu, then input number: 0, 5, 0, 0, 0
j. Press Menu+27, the LCD displays:
k. Press key Menu, and then press key ▲ or ▼ to choose No.2 channel
or input number 0,0, 2 directly. The LCD displays:
L. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
M. Press key VFO/MR to channel mode, the LCD displays: Display modes see Menu No.21 and Menu No.22.
Secondly,storing channel 2:(Transmitting frequency is 5MHz lower than receiving frequency.）
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Channel Delete（DEL-CH）——Menu No.28
1. In frequency or channel mode, the LCD displays:
2. Press key Menu,and then press key ▲ or ▼ to adjust channel 002 or input number 0,0, 2 directly.
The LCD displays:
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
This function is used to delete channels and information of the radio.
Example: Delete channel 2
!
NOTE
Please correctly choose the channel you want to delete in case to restorage and uncessary trouble.
With display CH-*** means there is storage channel, and then can be deleted.
⊙
Standby Backlight（WT-LED）——Menu No.29
1. In frequency or channel mode, press Menu+29, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
There are four options: OFF
YELLOW
GREEN
RED
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
You can choose the color of backlight when the radio is standby.
The operation steps are as follows：
11
R-CTCS
OFF
11
R-CTCS
71.9Hz
465.875
136.225
CT
13
T-CTCS
OFF
13
T-CTCS
71.9Hz
465.875
136.225
CT
MEM-CH
000
27
MEM-CH
001
27
13
T-CTCS
OFF
13
T-CTCS
88.5Hz
465.875
136.225
CT
SFT-D
OFF
25
25
SFT-D
-
OFFSET
00.000
26
MEM-CH
000
27
MEM-CH
002
27
465.575
136.225
-
DEL-CH
000
28
DEL-CH
002
28
WT-LED
OFF
29
29
WT-LED
RED
37
38
Summary of Contents for TG-45UV
Page 1: ...USER S MANUAL...