QBOX-100P Series - User Guide, Rev. 1.0
// 20
4.2.
Front I/O Panel
Figure 1: Front I/O Panel
1
DC-In (see Chapter 4.2.1)
2
Power Switch (See Chapter 4.2.2)
3
Power LED (see Chapter 4.2.3)
4 Storage LED (see Chapter 4.2.4)
5
HDMI (see Chapter 4.2.5)
6
GbE (see Chapter 4.2.6)
7
USB 3.0 (see Chapter 4.2.7)
8 USB 2.0 (see Chapter 4.4.8)
9
RS232/422/485 (see Chapter 4.2.9)
10 Wi-Fi Antenna Port (see Chapter 4.2.10)
4.2.1.
DC-In (2-pin Phoenix Connector)
For DC connection, users should use the supplied power adapter to converts AC power to DC for use with this
connector, or prepare the connecting wires using the supplied Phoenix plug terminal to plug into this connector for
power input from a DC power source.
The supplied Phoenix plug terminal is attached to the supplied power adapter by default.
Users should detach it first before preparing their own connecting wires to a DC power
source.
Adapter’s power cord shall connected to a socket-outlet with earthing connection
1
10
2
3
4
5
8
8
6
6
7
7
9
10
