Chapter 2
CAUTION
Make sure your PCI card meets the height restrictions to avoid damage to the
card or your system.
1. Remove the PCI slot cover by loosening the retaining screw as shown.
PCI Slot
screw
PCI Cover
Figure 5 Remove PCI slot cover screw
2. Fully insert the PCI card into the PCI slot and secure with the retaining screw
3. Replace the rear cover and secure it using the screws previously removed
VESA Mounting
The product comes with VESA FDMI 100/75 standard mounting holes. Use M4x0.7
metric machine screws with the appropriate length for your mounting bracket. The
available internal clearance for the mounting screws is shown below.
Section
A
-A
4.2 mm
Figure 6 Available internal clearance for VESA mounting screws
19
OPC-1500/1700 User’s Manual