Quanmax OPC-1700 User Manual Download Page 11

Preface 

login to obtain a Return Material Authorization (RMA) Number. If you do not have an 

account, send an email to [email protected] to apply for one. 

All product(s) returned to Quanmax for service or credit must be accompanied by a 

Return Material Authorization (RMA) Number. Freight on all returned items must be 

prepaid by the customer who is responsible for any loss or damage caused by 

common carrier in transit. Returns for Warranty must include a Failure Report for 

each unit, by serial number(s), as well as a copy of the original invoice showing the 

date of purchase. 

To reduce risk of damage, returns of product must be in a Quanmax shipping 

container. If the original container has been lost or damaged, new shipping 

containers may be obtained from Quanmax Customer Service at a nominal cost. 

Quanmax owns all parts removed from repaired products. Quanmax uses new and 

reconditioned parts made by various manufacturers in performing warranty repairs 

and building replacement products. If Quanmax repairs or replaces a product, its 

warranty term is not extended. 

Shipments not in compliance with this Limited Warranty Return Policy will not be 

accepted by Quanmax. 

 

Limitation of Liability 

In no event shall Quanmax be liable for any defect in hardware, software, loss, or 

inadequacy of data of any kind, or for any direct, indirect, incidental, or 

consequential damages in connection with or arising out of the performance or use 

of any product furnished hereunder. Quanmax’s liability shall in no event exceed the 

purchase price of the product purchased hereunder. The foregoing limitation of 

liability shall be equally applicable to any service provided by Quanmax or its 

authorized agent. 

 

„

  Maintaining Your Computer 

Cleaning Components 

Internal fans cool the computer by drawing in air through air vents in the front of the 

computer and blowing it out the rear-side panels. Dust and other debris is drawn in 

with the air and, if allowed to build up, will interfere with the operation of various 

system components and insulate components, preventing heat from dissipating. To 

prevent this, an air filter has been installed in front of the air vents in the front panel 

to block dust and other debris from entering the computer. 

Dust and debris builds up on the air filter over time. When the air filter becomes very 

11 

OPC-1500/1700 User’s Manual 

Summary of Contents for OPC-1700



































Reviews: