Quanmax KEEX-2010, User Manual

Page: 66 / 85

4-16 KEEX-2010 Series User Guide
X
OnChip IDE Channel0
Options - Enabled, Disabled.
X
IDE Prefetch Mode
Options - Enabled, Disabled.
X
Primary Master/Slave Drive PIO Mode
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the two IDE
devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the best mode for each device.
Options - Auto, Mode 0, Mode 1, Mode 2, Mode 3 and Mode 4
X
Primary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating
environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your
hard drive and your system software both support Ultra DMA/33, select "Auto" to enable BIOS support.
Options - Auto, Disabled
X
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard
drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal
number of block read/writes per sector the drive can support.
Options - Enabled, Disabled
X
VIA OnChip PCI Device
Press Enter to select VIA OnChip PCI Device.
VIA OnChip PCI Device
Azalia HDA Controller
Giga LAN Controller
[Auto]
[Enabled]
Item Help
__________________________
Menu Level
¾
↑↓→←
Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-safe defaults F7 : Optimized Defaults
Table 4-11. VIA OnChip PCI Device
X
Azalia HD Audio Controller
Options - Auto, Disabled.