CLOCK77/PCI CLOCK77/USB CLOCK77/ISA
27
© QUANCOM Informationssysteme GmbH
4.4
Installing the CLOCK77/PCI for Windows NT 4
The installation of the drivers has to be done with the rights of the
system-administrator. If you don’t own such rights, contact your system
administrator.
1. Step: Software Installation:
After you inserted the interface board into the PC, the CLOCK77 Software has to be
installed. Insert the Clock-Installation- CD into your CD-ROM-drive.
·
Click on Start | Run, and choose SETUP.EXE from the WIN-NT folder of the
Installation-CD and click on “OK”.
(Please obey, that you close all running windows-programs prior installation of the software.)
·
Start the process with clicking on ”Next”.
·
Now you choose the model of your clock: PCI-Card and go on with “Next”.
·
You can choose the destination path of the CLOCK77-Software with “Browse”. Click on “
Next” to accept your decision.
·
The installation-process will be started with “Next”.
·
After the files were copied and the drivers registered, the installation will be closed with “
OK”.
·
You now may reboot your system to ensure that all drivers are loaded properly.
