Installing drivers and software for the QUANCOM CLOCK77
26
© QUANCOM Informationssysteme GmbH
After installation of the drivers for the interface board, the CLOCK77 Software has to be
installed.
·
Click on Start | Run, and choose CLK77D.EXE from the WIN-XP-2000 folder of the
Installations-CD and click on “OK”.
·
If after starting CLK77D.EXE a message-box appears, which prompts for a restart of the
system, click on “Yes”. After rebooting the system the installation will resume
automatically.
(This step will only be necessary if no version of the software-installer is present on your system)
·
Continue the installation after reboot with clicking on “Next” in the shown window.
(Please obey, that you close all running windows-programs prior installation of the drivers.)
·
After reading and agreeing the license agreement with “I accept the license agreement”
go on with “Next”.
·
You may now enter your personal user-data (name; organisation) and accept your
entered values with “Next”.
·
You can choose the destination path of the CLOCK77-Software with “Browse”. Click on “
Next” to accept your decision.
·
Now you choose the model of your clock: CLOCK77/ISA and go on with “Next”.
·
The installation-process will be started with “Next”.
·
After the files were copied and the drivers registered, the installation will be closed with “
Finish”.
·
You now may reboot your system to ensure that all drivers are loaded properly.
