QUAN SHENG TG-UV2PLUS, User Manual

Page: 17 / 20

Press key each time, the "
↓
"symbol will display in turn between the main
frequency/channel and sub-
frequency/channel. Next you can change the frequency or data such as frequency
、
channel number
、
output power
、
CTCSS/DCS code and so on.
Example: Channel 3 (same frequency).
Receiving frequency: 466.675MHz CTCSS: 71.9KHz
Transmitting frequency: 466.675MHz CTCSS: 71.9KHz
Channel 5 (different frequency)
Receiving frequency: 465.575MHz
Transmitting frequency: 460.575MHz CTCSS: 88.5KHz
First, storing channel 3:
a: The radio on frequency working mode, input key 4
、
6
、
6
、
6
、
7
、
5 ordinal.
b: Press key + , and then press key to enter the CTCSS mode(see Menu 2).
Press or to choose the receiving CTCSS 71.9, then press key to confirm.
c: Press key + , and then press key to enter the CTCSS mode(see Menu 3).
Press or to choose the transmitting CTCSS 71.9, then press key to confirm.
d: Press key + , and then press
or to choose the channel number "SAV.3H".
e: Press key again to confirm. It doesn't operate the b and c step if you don’t set the
CTCSS.
Next, storing channel 5:
a: The radio on frequency working mode,input key 4
、
6
、
5
、
5
、
7
、
5.
b: Press key + , and then press key to enter the CTCSS mode
c: Press
or to choose the transmitting CTCSS 88.5, and then press key to
confirm.
26 27
Channel Storing-----Menu 26
When the radio on the frequency working and standby mode, input the desired
frequency and parameters.
1. Press key
+ , the LCD will displays"SAV**H". (as picture 21).
2. Press key or to choose the channel number.
3. Press key to save or not, the LCD will displays"SAVE?". (as picture 22).
4. Press key to save again.
F MR/
VFO
MR/
VFO
Picture
21
H
sav
2h
M
01
46.025
00
Picture 22
H
save ?
M
01
46.025
00
F 2
RX . T
BAND
MR/
VFO
F 3
TX . T
BAND
MR/
VFO
F MR/
VFO
MR/
VFO
F 3
TX . T
BAND
MR/
VFO
MR/
VFO
d: Press key + repeatedly until the repeater shift direction shows (-). (see Menu 11).
e: Press key + + , and then input key 0
、
5
、
0
、
0
、
0 ordinal.
f: Press key to confirm.
g: Press key + ,and then press
or to choose the channel number "SAV.5H".
h: Press key again to confirm.
4
RPT
F
2
RX . T
F 0
SET
MR/
VFO
MR/
VFO
F
MR/
VFO
NOTICE
MR/
VFO
Press key to shift the radio between frequency and channel mode after setting.
Frequency and Channel Mode Shift-----Menu 27
This function is mainly shift the frequency and channel mode of the radio.
Press key each time, the radio will shift between frequency and channel mode.
MR/
VFO
NOTICE
The frequency and channel mode shift can be done only when the LCD shows a"
↓
"symbol.
Keypad Lock-----Menu 28
Press key more than 2 seconds, keypad lock; operate again, keypad unlock. (as picture 23).
F
M
06
440.025
00
M
01
46.025
00
H
Picture 23
"
↓
" Symbol Switch-----Menu 29
MAIN