QUAN SHENG TG-UV2PLUS, User Manual

Page: 13 / 20

1. On standby mode, press + + to enter, the LCD displays "STP.**".
2. Press or to choose. There are 5/6.25/10/12.5/15/20/25/30/50/100khz to choose.
3. After setting, press to confirm. Press or PTT to return to standby mode.
18 19
1. On standby mode, press + to enter, the LCD displays "R". (as picture8)
2. Operating it repeatedly means turning on or off.
3. After setting, the system will confirm automatically, and return to
standby mode.
1. On standby mode, press + to enter, the LCD displays DW (as picture 9).
2. Repeatedly press + , you may choose"ON"or "OFF”.
3. After setting, the system will automatically confirm. At this time, the main and sub
channels have been in dual-watch.
4. If you want to return to standby mode, press + , the LCD will not show "DW".
F
7
REV
H
Picture 8
M
06
440.025
00
M
01
46.025
00
R
F 8
SCR
MR/
VFO
NOTICE
REV is available only when in different frequencies. This function is invalid when in
the same frequency.
Voice Scrambler (SCR)-----Menu8
This function may guarantee the secracy of your talk, that is: when in voice scrambler
talking, other radios without voice scrambler can receive your signal but can't hear your
talking content.
1. On standby mode, press + to enter, the LCD displays "SCR.OFF".
2. Press or to choose "ON" or "OFF".
3. After setting, press to confirm and it would automatically return to standby mode.
NOTICE
Communication is available only when two radios have voice scrambler at the same time.
Voice scrambler board is needed before voice scrambler.
Dual Watch Operation (DW)-----Menu9
Example: Main channel frequency is 460.125MHz, sub channel frequency is151.235MHz.
Want to set dual watch, operates it as following:
9
DW
9
DW
F
F
Picture 9
M
05
460. 25
00
M
02
5 .235
00
DW
1. On standby mode, press + to enter, the LCD displays DW (as picture 9).
2. Repeatedly press + , you may choose"ON"or "OFF”.
3. After setting, the system will automatically confirm. At this time,
the main and sub channels have been in dual-watch.
4. If you want to return to standby mode, press + , the LCD will not show "DW".
Example: Main channel frequency is 460.125MHz, sub channel frequency is151.235MHz.
Want to set dual watch, operates it as following:
9
DW
9
DW
F
9
DW
F
F
H
Picture 9
M
05
460. 25
00
M
02
5 .235
00
DW
NOTICE
If any channel or frequency receives signal, you must reply in 7 seconds. Otherwise
the radio will return to dual-watch mode.
If sub channel doesn't receive a signal, only the main channel can transmit normally.
You should exit this function before changing the data and information of other
frequencies and channels.
F 0
SET
1
POW
MR/
VFO
F
NOTICE
Channel Step (STP)-----Menu 10
Using this function may choose the correspond step frequency to the radio you want to set .
On channel mode, this function setting is invalid.
Frequency Deviation-----Menu 11