3
Installing the Library
XLS Library Site Planning Guide
3-23
Service Access Requirements for the XLS-812300
Figure 3-8
shows the service access requirements for an XLS-812300, assuming that two
expansion pods are installed and that power/PC bay is slid all the way out.
Power/PC Bay
13.1 in
(33.3 cm)
19-Inch
Equipment Rack
(optional)
11.9 in
(30.2 cm)
17.6 in
(44.7 cm)
Pods shown open
(maintenance
position)
Optional Expansion Pods
(120 cartridges each)
34.8 in
(88.4 cm)
11.6 in
(29.5 cm)
50.5 in
(128.3 cm)
70.0 in
(177.8 cm)
Figure 3-8
Service access requirements for the XLS-812300, including expansion pods
3.1.5
Media Expansion Modules (MEMs)
All LRMs can be expanded by adding one or two MEMs on either side. The XLS-89000
holds an additional 1,075 cartridges, while the XLS-85000 contains 535 cartridges. If you
plan to install MEMs (whether during the initial installation or in the future), consider
the recommended installation order:
1. Install the base unit.
2. Install the MEM on the
right
side of the base.
3. Install the MEM on the
left
side of the base.
