Model WBP-101 Wireless Pulsewave Blood Pressure Monitor
Model WBP-101 Wireless Pulsewave Blood Pressure Monitor
CARE AND MAINTENANCE
1.
If the device gets dirty, use soft and damp cloth (with mild detergent if
needed) to gently wipe it. Do not use gasoline, acetone, methanol or
other solvents.
2.
Do not wet the DualCuff, nor let liquid enter the device.
3.
Do not crash or drop the device.
4.
Keep the device and accessories in the dedicated box when not in use.
5.
Do not leave the device subject to extreme temperatures, humidity or
direct sunlight.
6.
Do not tear/bend the DualCuff, nor fold tightly.
7.
Do not start measurement when the DualCuff is not on arm, or else, the
DualCuff may be damaged.
8.
Unauthorized changes or modifications will void the product warranty.
Do not disassemble or attempt to repair the unit and/or components.
9.
Fully charge the battery if the unit will not be used in more than three
months.
TROUBLESHOOTING
ERROR INDICATORS
Error
code
Reasons
Measures
EE01
The cuff pressure
exceeds 270mmHg
Turn off the monitor
and remove it quickly
EE02
Air leakage observed
Contact manufacturer or
distributors for service
Others
Unknown errors
Contact manufacturer or
distributors for service
The following chart lists other common issues and solutions
.
Please
contact manufacturer or distributors your problems is not listed.
Symptom
Possible reason
Solution
No display
Low power
Use the AC adaptor to
charge the battery
Inaccurate results
Arm cuff may not be
at the same level as
the heart
Apply the cuff and
posture correctly
Inconsistent results
Results may vary at
times if measured
under tension
Take a deep breath,
relax, and keep quiet
15
16
