SOFTPRO INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
2
.
6)
Disconnect inlet and outlet lines.
Remove the holding clips at the water softener inlet and outlet. Disconnect the water softener from the water
pipes.
If there are no clips, then cut the water line pipe as it enters the water softener. Use the appropriate cutting tool
for the different types of pipes (copper, PVC, PEX, CPVC, etc.)
7)
Disconnect brine line.
Disconnect the brine line from the side of the softener valve.
8)
Remove the old brine tank and mineral tank. Dispose properly.
9)
Clear and clean the area for your new Fleck Water Softener System.
You are now ready to install your new Fleck Water Softener System.