SOFTPRO INSTALLATION GUIDE
©2022 SoftPro Water Systems. All rights reserved.
37
.
Bypass handles (red) may initially be stiff to turn.
You may opt to use the included Allen wrench as leverage to open the bypass valves. Simply insert the wrench into the
top of each red handle and slowly turn open.
6)
Initial cleaning of the softener mineral tank.
a)
Open the nearest softened treated cold-water faucet or hose bib and run the water until it shows clear.
a.
Periodically use a clear container to view the water clarity.
b)
Let the water run until the water shows clear in the container. This is to bleed out the resin’s color and air.
c)
Once the water runs clear into the container, turn off the faucet or hose bib. Your new softener is ready and
in service operation.
NOTE: The resin media is pre-charged.
Initial manual regeneration is NOT required. Resin media has been previously pre-charged and ready for use.
7)
Complete the programming of your new control valve. Please refer to the following valve programming guide.
PROGRAMMING YOUR VALVE
INITIATE THE PROGRAMMING SETTINGS
Press and hold down the
MENU
button until the
[MENU] screen unlocks with a beep (about 3
seconds).
Flow Rate Display: This will display the flow rate that
is actively being passed through the softener and
back to your home.
SET DATE AND TIME
1.
Press
MENU
to display Date and Time
settings. (If already highlighted, skip to next
step.)
2.
Press
SET
to enter the Date and time.