Quality Heating THE-12DW, Manual

Page: 22 / 38

22
1. Use the screws to install two the fixed frames to the device, as shown in figure A.
2. Use the screws to install the fixed frames to the wall or ceiling, as shown in figure B.
3. Affix the device to the chosen area with screws, as shown in figure C.
If the appliance is to be wall mounted the device back plate must be at least 97mm,
the left and right side must be installed at least 200mm from the wall, as shown in
figure 3.
4. Ceiling installation: the device back plate must be installed at least 97mm from the
wall, the device left and right side must be installed at least 200, from the wall, as
shown in figure 2.
5. Double hanging ceiling installation: two electrical appliances are connected
through a connecting frame installed on the ceiling, the device back plate must be
installed at least 97mm from the wall, the device left and right side must be installed
at least 200mm from the wall, as shown in figure 2.
6. Extended installation: sling appliances will hook up and hang from the ceiling, the
device back plate must be installed at least 97mm front the wall, the device left and
right must be installed at least 200mm from the wall, as shown in figure 4.