Qualitel Milano CLI, Instruction Manual, Page: 8 / 11

7
¾
Setting Local Area Code
1. After setting up the date and time, press the SET button. The LCD displays CODE 0 ----- and
the long distance code “ 0 ” flashes,
2. Press the UP or DOWN button to edit the flashing code from 0 to 9 or -.
3. Press the SET button to confirm and enter the next setting.
4. Repeat the above procedure to set the rest of the digits of the code.
¾
Adjusting LCD Contrast
1. After setting up the local area code, press the SET button, the LCD displays LCD 08
2. Press the UP or DOWN button to adjust the LCD contrast. A total of 16 levels can be selected.
3. Press SET key to confirm and exit.
In the on-hook state, press the FLASH button to enter the LCD contrast setting directly,
then press the FLASH button continuously to adjust the LCD contrast.
SECRET CODE SETTING AND REMOTE MONITOR FUNCTION
¾
Setting
1. In the on-hook state, press and hold the RING button for 3 seconds, the LCD displays Pin ----.
2. Enter a 4-digit PIN using the numeric keys.
3. Press DEL to edit the secret code, press SET to confirm.
4. If the last digit of the secret code is #, the telephone will activate the remote monitor function.
5. Set the ringer to OFF. (Please refer to section “ SETTING RING TONE ”).
¾
Using the secret code function:
1. Secret code: When the ringer is set on OFF (do not disturb mode), and a call is received the
telephone will not ring although the calling party will hear a ringing tone. After 3 to 4 rings the
calling party will hear a short beep sound. If the calling party knows your secret code and
enters the secret code after hearing the beep sound, the telephone will start to ring. You are
now able to answer the call by lifting the handset or by pressing the SPEAKER key.
2. Remote monitor: If the last digit of the secret code is #, after the calling party enters the
correct secret code, the telephone will go into hands free mode automatically.
3. If the calling party keys in the wrong code, he/she will have to call again and key in the correct
secret code.
NOTE: This function is useful only when the telephone ringer is set to OFF. The calling party must
know the secret code in order to enable this feature.
TRANSFER BETWEEN PARALLEL PHONES
¾
Setting paging number
1. In on-hook state, press and hold the SET button, the LCD displays EL--
2. Key in “
*
” and the paging number (example “
*1
”and “
*2
” ), using the DEL button to edit.
3. Press the SET button to confirm and exit.