Using your QUALITEL DECT Repeater
Location tips:
• place as high as possible, at least 1.8
meters off the ground
• place 1 meter from sources of electrical
interference such as hi-fi systems, office
equipment microwaves, computers and
routers
• avoid heat sources and direct sunlight
• avoid things that can interfere with radio
signals such as metal doors, thick walls
and cupboards
• If extending the range to outdoors locate
the Repeater near a window and higher on
the wall, as radio signals do not work as
well through thick walls
• If using more than one Repeater on a
telephone base station ensure the
Repeaters are placed at least 10 meters
apart
• Do not use outdoors
Once registered, the Repeater can be positioned anywhere within the reception
range of the telephone base station, preferably towards the direction you wish to
extend the range.
1. Locate a suitable position near a mains socket within the reception area of the
telephone base station and towards the direction you wish to extend the range.
2. Plug the power adaptor into the mains socket (and into the Repeater if it has
been disconnected) and switch on the mains power at the wall socket.
The blue LED will begin to flash as it connects to the telephone base station, then
stops flashing and remains lit once a link has been made. If the LED continues to
flash, switch the power off and on again. If flashing continues, see the ‘Help’
section on page 10.
Operating a handset for the first time within the extended
Repeater area
Make sure that multiple handset(s) has been registered to the same telephone
base station as the Repeater.
Summary of Contents for C33R
Page 1: ...C33R Repeater User manual...
