5
6
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
Mounting to a Concrete Wall
2b
3
Place concrete anchors (W-B) in each hole. Tap each anchor flush with the wall using a hammer.
Using a socket wrench, mount the wall plate (A) and fasten them with the provided lag bolts
(W-A) and D6 washers (W-C).
Hold the marking template (G) provided against the wall where you want to install the TV,
mark six holes for drilling.
1
NOTE
Do NOT use power drill and do NOT over tighten the lag bolts.
Insert the bubble level (D)
on the wall plate (A)
D
Bubble Level
A
Wall Plate
W-A
W-C
W-B
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.7" (70 mm) depth at the marked locations in the previous step.
2
ø 10mm
(ø 3/8")
70mm
(2.7")
70mm
(2.7")
G
Marking Template
QG-TM-030-BLK
