Do NOT use power drill and do NOT over tighten the lag bolts.
NOTE
7
8
3
Place plastic anchors (W-B) in each hole. Tap each anchor flush with the
ceiling using a hammer. Using a socket wrench, mount the ceiling plate and
fasten with the provided lag bolts (W-A) and D6 washers (W-C).
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
W-B
W-C
W-A
W-B
Concrete Ceiling
Choose the appropriate spacer (M-I/ M-J/ M-K)
when mounting to recessed holes.
NOTE
B
Projector Mounting Bracket
Projector
Installing Projector Mounting Bracket to the Projector
3
M-Q
Depending on your projector, you may use one of the combinations above.
TIP
Align the holes of extension brackets over the mounting holes of the projector, select appropriate
screws (M-A/ M-B/ M-C/ M-D) and washers (M-E/ M-F/ M-G/ M-H). Place bottom spacer (M-L) in
between the brackets and the projector.
Optional:
for mounting to recessed holes only, choose
appropriate spacer (M-I/ M-J/ M-K) in addition to the 5mm spacer (M-L).
4 Long Extension Brackets
+
4 Short Extension Brackets
4 Long Extension Brackets
2 Long Extension Brackets
+
2 Short Extension Brackets
OR
OR
M-L
M-E/ M-F/
M-A/ M-B/ M-C/ M-D
M-I/ M-J/ M-K
Recessed Hole
M-G/ M-H