SKIP TO STEP 3
W-A
W-C
Mounting to a Concrete Ceiling
2b
5
6
Do NOT use power drill and do NOT over tighten the lag bolts.
NOTE
Hold the marking template provided against the ceiling where you want to install the
projector, mark four holes for drilling.
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.7" (70 mm) depth at the marked locations in the previous step.
1
2
WARNING
Installers are responsible to provide hardware for other types of mounting situations.
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
Wooden Ceiling
X
Using a socket wrench, mount the ceiling plate and fasten with the provided
lag bolts (W-A) and D6 washers (W-C).
5
ø 10mm
(ø 3/8")
70mm
(2.7")
70mm
(2.7")