RA0038LS
9.
2. To release the blade, use
screwdriver to hold flange
and release nut, the blade
than then be removed.
!
WARNING!
Please make sure the cutting head has
been assembled correctly before use.
Pruning Saw Attachment Assembly
1. Remove the chain cover from the pruning saw attachment
head
2. Fit the bar (5) to the pruning saw head.
3. Fit the saw chain (6) to the bar.
4. Adjust the chain tension as necessary.
5. Replace the chain cover.
Hedge Trimming Attachment
Assembly
1. The hedge trimming attachment comes pre-assembled and is
ready for use. All that is required for operation is the cutting head
to be set to the desired angle and set in place. Then remove the
safety covers from the cutting blades.
!
WARNING!
Please ensure the pruning attachment
bar/ chain lubrication tank is filled with bar lube oil
before operating. Oil capacity- 150ml.
Assembling Attachments to Main
Engine Shaft
1. Loosen the shaft coupling handle and release the locking
catch.
2. Slide the attachment shaft into the attachment shaft,
ensuring the main shaft locating pin lines up with the hole in
the attachment shaft. Check the drive spline on the motor
drive shaft has located correctly into the attachment drive
shaft. This may require the attachment head or the engine
to be rotated slightly.
3. Replace the locking catch into place and tighten the shaft
coupling handle.
Fuel
This product is powered by a 4 stroke engine and requires
straight unleaded petrol. Do NOT mix oil with the petrol.
Use unleaded petrol intended for motor vehicle use with an
Octane rating of 87 ( [R + M] / 2) or higher. Purchase fuel
from a reputable fuel supplier.
Do not leave petrol sitting in your machine for longer than 30
days, as it will turn stale and engine operation and performance
will be severely compromised. The petrol tank capacity is
approx 650ML.
Because your product is equiped with a 4 stroke engine it
operates with oil in the crank case. Use SAE30 or 10W30 oil
depending on external conditions. Fill the engine crank case
with approx 850ML of oil and make sure oil does not exceed
the "Full" mark of the dipstick.
FUEL & LUBRICATION
!
WARNING!
Petrol is extremely flammable and
explosive. A fire or explosion from petrol will burn you
and others
!
WARNING!
Always stop the engine before filling the
tank. Never add fuel to a machine with a running or hot
engine.
