background image

  

  

17

16

  

  

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

Declaration of Conformity 

Guarantee

Dear Customer,
In the unlikely event that your device develops a fault, please contact our Customer service 

department on the telephone number shown below.
1. These guarantee terms cover additional guarantee rights and do not affect your statutory 

warranty rights.
Claims must be accompanied by Proof of Purchase. This must be in the form of a Sales receipt 

or Bank statement and must show that the product has been purchased within 2 year prior to the 

claim, from the retailer that it was originally sold to.
2. Our guarantee covers problems caused by material or manufacturing defects, and will result 

in the repair of these defects or replacement of the device with a like for like or similar article. 

Please note that our devices have not been designed for use in commercial, trade or industrial 

applications. Consequently, the guarantee is invalidated if the equipment is used in commercial, 

trade or industrial applications or for other equivalent activities.
3. The following are also excluded from our guarantee:
A) Faults due to accidents, customer misuse, or unauthorized repairs
B) Consumable Parts such as Blades
C) Failure due to lack of routine maintenance
D) Failure as a result of not using the equipment in accordance with the manual and safety 

instructions
E) The adjustment of cables, drive belts

4. The guarantee is valid for a period of 2 year starting from the purchase date of the device. 

Guarantee claims should be submitted before the end of the guarantee period within two weeks 

of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee 

period. The original guarantee period remains applicable to the device even if repairs are carried 

out or parts are replaced. In such cases, the work performed or parts fitted will not result in 

an extension of the guarantee period, and no new guarantee will become active for the work 

performed or parts fitted. This also applies when an on-site Service is used.

5. Please keep your sales receipt in a safe place. If the defect is covered by our guarantee your 

device will either be repaired under the terms of guarantee or we will send you a replacement 

device. This device may be re-conditioned or Like for like replacement.

0359

EC Declaration of Conformity

Year of 1st Issue .

12

Homebase Ltd

          489-499 Avebury Boulevard

          Saxon Gate West

          Milton Keynes

          Buckinghamshire

          MK9 2NW

We hereby certify that the product stipulated above complies with all the relevant provisions of the following EC new approach directive/s.

This declaration of conformity is issued under the sole responsibility of the manufacturer

Type of Product:  Electric reel lawn mower 

Model Number:  SCM 32

Cat / Article Number: 131597

Product Description:

Rated voltage: 230-240V AC 50Hz

Input power: 400W

No load speed: 3500/min

Cutting Width: 320mm

Protection class: II

Photograph:        

Applicable EC Directives

2006/42/EC (MD)

2004/108/EC (EMC)

1999/5/EC (R&TTE)

2006/95/EC (LVD)

2009/105/EC (Pressure)

2000/14/EC Annex VI , 2005/88/EC

89/686/EEC (PPE)

2009/48/EC (Toys)

L

WA ,d

=96dB(A), L

PA

= 76dB(A), K

pA

=3dB (A)

2009/142/EC (Gas)

89/106/EEC (Construction)

2011/65 /EU (RoHS)

Applicable 

Harmonized Standards:

Report Date

Verification of conformity

Certificate       Notified Body

EN 60335-2-77:2010

EN 60335-1:2002+A11, A1: 

2004+A12, A2: 2006+A13:2008 

+A14 :2010+A15:2011

EN 62233:2008

2012-10-12

MD            ITS

EN55014-1: 2006+A1 :2009

EN55014-2:1997+A1:2001+A2:2008

EN61000-3-2: 2006+ A1 :2009+

A2 :2009

EN61000-3-3: 2008

2012-10-12

EMC            ITS

EC Type approval certificate number

SH12090601-V1

2012-10-12

CE            ITS

Issued number: 1.0

Issued on : 2012-10-12

Signed :           

Creator:  Max

Name :   Roger Panton-Kent

Position:  QA

Position:  Head of Quality Assurance

The associated technical file for this product can be found within Homebase Ltd. idocument system

Summary of Contents for SCM32














Reviews: