Qualcast Q-EBH 750, Operating Instructions Manual

Page: 6 / 14

Safety Notes 1. Safety Instructions
Warning! Read these instructions carefully, be
familiar with the controls and the proper use of the
tiller. Please keep the instruction safe for later use.
Note the instructions for use!
Important. Rotating tool.
Caution! Danger from catapulted parts;
keep a safe distance.
Wear ear muffs!
Wear safety goggles!
Wear safety gloves
If the cable is damaged or cut, pull out the
power plug from the mains immediately.
Never use the equipment in damp locations.
Pull the power plug before carrying out
maintenance, cleaning and repair work.
Warning! When using electric tools, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury, in-cluding the following.
Read all these instructions before attempting to operate this
product and safe these instructions.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don’t expose power tools to rain. Don’t use power tools in
damp or wet locations. Keep work area well lit. Don’t use
power tools in presence of flammable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g. pipes,
radiators, ranges refrigeratiors).
4. Keep children away
Do not let visitors contact tool or extension cord. All visitors
should be kept away from work area.
5. Store idle tools
When not is use, tools should be stored in dry, high, or
locked-up place, out of the reach of children.
6. Don’t force tool
It will do the job better and safer at the rate for which it
was intended.
7. Use right tool
Don’t force small tools or attachments to do the job of
heavy duty tool. Don’t use tools for purposes not intended:
for example, don’t use circular saw for cutting tree limbs
or logs.
8. Dress properly
Do not wear loose clothing or jewelry. They can be caught
in moving parts. Rubber gloves and nonskid footwear are
recommended when working outdoors. Wear protective
hair covering to contain long hair.
9. Use safety glasses
Also use face or dust mask if cutting operation is dusty.
10. Don’t abuse cord
Never carry tool by cord or yank it to disconnect it from
the socket. Keep cord from heat, oil and sharp edges.
11. Don’t overreach
Keep proper footing and balance at all times.
12. Maintain tools with care
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean and free from oil and
grease.
13. Disconnect tools
When not in use, before servicing, and when changing
accessories such as blades, bits and cutters.
14. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
15. Avoid unintentional starting
Don’t carry plugged-in tool with finger on switch. Be sure
switch is off when plugging in.
Explination of symbols on the tiller
4
Helpline No. UK 0151 649 1500 / IRE 189 094 6244 Helpline No. UK 0151 649 1500 / IRE 189 094 6244