Ensure cables are not trapped when folding/unfolding top handles,
do not drop the
The following table gives checks and actions that you can perform if your machine does not operate cor-
rectly. If these do not identify/remedy the problem contact an Atco-Qualcast Approved Service Agent.
Warning: Switch off, remove plug from mains before investigating fault.
Atco-Qualcast
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
Service ..................................... +44 01895 838782
Fax Service ..................................... +44 01895 838789
✆
Advice line .............................. +44 01895 838791
Fax .................................................. +44 01895 838793
Measured values determined according to
2000/14/EC (1.60 m height, 1 m distance away)
and EN 25 349.
Typically the A-weighted noise level of the product
is: sound pressure level 81 dB (A)
;
sound power
level: 92 dB (A).
The typical weighted acceleration is 2.5 m/s
2
.
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN
60
335,
EN 836 according to the provisions of the directives
89/336/EEC, 98/37/EC, 2000/14/EC.
2000/14/EC: The guaranteed sound power level
L
Wa
is lower than 94 dB (A). Conformity assessment
procedure according to Annex VIII.
Notified body: SRL, Sudbury England
PLACE: Stowmarket, 03/2003
Signature:
Position: Director
Fault Finding
Symptom
Possible Cause
Remedy
Machine fails to operate
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Inspect cable, replace if damaged
Contact Service Agent
worn/missing tines
fit replacmen
Machine labours or belt
squeals
Raking / Scarifing too low
Increase height of raking
(see “Adjusting the operating
height”)
Cutting tines not rotating
Cutting tines obstructed
Belt is slipping or is damaged
Clear obstruction
Contact Service Agent
Excessive vibration/noise
Cutting tines damaged
Contact Service Agent
Poor collection
Raking / scarifing in wet conditions
Refer to scarifing / raking tips
Service
Declaration of Conformity
Lawnraker 32 Seite 7 Montag, 23. Februar 2004 2:56 14
