Cylinder Mower
Lawnraker 32
Part number
F016 301 0..
Rated power
400 W
Blade width
32 cm
Grassbox capacity
31 l
Weight
10 kg
Protection class
/
II
Serial Number
See serial No.
10
(rating
plate) on machine
This product is intended for domestic, lawnraking,
scarifying and for the collection of leaves in the
lawn area.
This manual gives instructions on the correct assem-
bly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approx-
imately 10 kg. If necessary, obtain assistance to re-
move from packaging.
Take care when carrying the lawnraker to the lawn,
as the tines are sharp.
Carefully remove the machine from its packaging
and check that you have all the following items:
– Lawnraker with handle assembly
– Handle bottom
– 2 Bolts (fitted to handle bottom)
– 2 Wing nuts (fitted to handle bottom)
– 2 Pivot pins (fitted to handle bottom)
– 2 Pivot covers (fitted to handle bottom)
– Grassbox
– Operating instructions
When parts are missing or damaged, please contact
the consumer care hotline on (01895) 838782 for assist-
ance. We also have a network of Atco-Qualcast Ap-
proved Service Agents who you can contact for serv-
ice and advice both within and outside the period of
guarantee.
1
Handle top
2
Switch lever
3
Safety button
4
Mains plug**
5
Cable restraint**
6
Handle bottom
7
Grassbox
8
Ventilation slots
9
Height of cut lever
10
Serial No (on rating plate)
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating Voltage
is 230 V ac, 50 Hz. Only use an approved extension
cable. Contact your service agent for details.
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For Product not sold in GB:
WARNING: For safety, it is essential that the mains
plug
4
attached to the machine is fitted to the
power supply cable
13
as in Figure
B
.
The couplings of connection leads must be pro-
tected against splashes and the coupling sockets
on the leads must be made of rubber or coated
with rubber.
Fixing means for the connection leads must be
used.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used
if in perfect condition.
If the supply cord is damaged it must be replaced
by a Atco-Qualcast Approved Service Agent.
Product Specification
Intended Use
Introduction
Delivered Items
Operating Controls
For Your Safety
WARNING! SWITCH OFF, REMOVE PLUG FROM
MAINS BEFORE ADJUSTING, CLEANING OR IF CABLE
IS CUT OR ENTANGLED.
THE TINES CONTINUE TO ROTATE FOR A FEW SEC-
ONDS AFTER THE MACHINE IS SWITCHED OFF.
CAUTION - DO NOT TOUCH ROTATING TINES.
Lawnraker 32 Seite 2 Montag, 23. Februar 2004 2:56 14
