Customer Helpline
0344 801 0979
19
ORIGINAL INSTRUCTIONS
Maintenance
Troubleshooting
Maintenance Schedule
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may see sparks through the ventilation
slots. This is normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
The following chart lists problem symptoms, possible causes and corrective action, if your electric
grass trimmer does not operate properly. If these do not identify and correct the problem, contact
your service agent.
WARNING! Always switch the product off, disconnect it from power supply and let the product cool
down before performing inspection, maintenance and cleaning work!
Problem
Possible Cause
Corrective Action
Grass trimmer does
not operate
1.1 No power
1.2 Mains socket faulty
1.3 Extension cord
damaged
1.4 Fuse faulty
1.1 Check power
1.2 Check other socket, replace
1.3 Check cord, replace
1.4 Replace fuse
Grass trimmer
operates
intermittently
2.1 Extension cord
damaged
2.2 Internal wiring
damaged
2.1 Check cord, replace
2.2 Contact Service Agent
Grass trimmer
labours
3. Grass too high
3. Cut in stages
Grass trimmer is not
cutting
4 Line too short/broken
off
4 Feed the line manually/automatically
Line can’t be fed
5.1 Spool empty
5.2 Line inside the spool
entangled
5.1 Replace the spool
5.2 Inspect the spool, rewind if necessary
Line keeps breaking 6.1 Line inside the spool
entangled
6.2 Trimmer used
incorrectly
6.1 Inspect the spool, rewind if necessary
6.2 Only trim with the tip of the line, avoid stones,
walls and other hard objects.
Feed the line regularly to maintain full cutting
width.
General Troubleshooting
Summary of Contents for GGT600A1
Page 24: ......
