QuadTech 1855, Instruction Manual

Page: 31 / 76

Interface Page 31 of 76
2.3.3.7 Handler Mode
The handler interface mode can be set to CLEAR or HOLD. The instrument default setting is
CLEAR. When set to CLEAR, the handler interface will clear the last test result prior to each
subsequent measurement. When set to HOLD, the handler interface will hold the last test result
until the next measurement is made and displayed. To change the handler mode press
[SYSTEM SETUP], [SYSTEM CONFIG] and the down arrow [
⇓
] until the box next to
HANDLER MODE is highlighted, then press [F1] = CLEAR or [F2] = HOLD.
Clear Test Results
Hold Test Results
F3
F1
F2
F4
< SYSTEM CONFIG >
CLEAR
HOLD
TRIG DELAY
ALARM MODE
TEST PARAMETER :
BEEPER
SOUND MODE
TRIG EDGE
HANDLER MODE
:
:
:
:
:
:
L.C.
LOW
FAIL
PULSE
0000 mS
FALLING
CLEAR
2.3.3.8 Contrast
The display contrast can be set from 00 to 15. The instrument default setting is 07. The darkest
contrast is 00 the brightest is 15. To change the display contrast press [SYSTEM SETUP],
[SYSTEM CONFIG] and the down arrow [
⇓
] until the box next to CONTRAST is highlighted,
then press [F1] = DIGIT UP to brighten the contrast or [F2] = DIGIT DOWN to darken the
contrast.
Increase brightness: 00 - 16
Decrease brightness: 16 - 00
F3
F1
F2
F4
< SYSTEM CONFIG >
DIGIT UP
DIGIT DOWN
LINE FREQUENCY
KEY LOCK
CONTRAST :
GPIB ADDRESS
RS232 BAUD RATE
CHARGE TIME
RANGE DWELL
:
:
:
:
:
:
07
17
19200
OFF
60Hz
Vm = Vs
0.0 S
2.3.3.9 GPIB Address Code
The IEEE-488 interface address can be programmed from 00 to 30. The instrument default
setting is 17. To change the GPIB ADDRESS press [SYSTEM SETUP], [SYSTEM CONFIG]
and the down arrow [
⇓
] until the box next to GPIB ADDRESS is highlighted, then press [F1] =
DIGIT UP to increase the address, or [F2] = DIGIT DOWN to decrease the address.
Increase address: 00 - 30
Decrease address: 30 - 00
F3
F1
F2
F4
< SYSTEM CONFIG >
DIGIT UP
DIGIT DOWN
LINE FREQUENCY
KEY LOCK
CONTRAST :
GPIB ADDRESS
RS232 BAUD RATE
CHARGE TIME
RANGE DWELL
:
:
:
:
:
:
07
17
19200
OFF
60Hz
Vm = Vs
0.0 S