Quadstick FPS, User Manual

Page: 27 / 94

Dropdown lists used in Profiles
Dropdown lists of all the Inputs and Outputs that were discussed in previous sections for the
sensors and emulated devices are used to guide the user when creating a new profile.
To chose an Output command or Input source, click in the desired cell and an arrow symbol will
display near the upper right corner. Clicking on this symbol will display the list of available
Outputs. (It can take a while for the list to appear the first time, so give it time). A profile is
created by adding additional Output choices and matching that up with an Input. The first blank
cell in the Outputs column indicates the end of the list, any outputs following an empty cell will
be ignored. A blank cell in an Inputs column means the Output is off in that mode.
It is permitted to have more than one Input associated with an Output, just repeat the Output
choice on another row and select the additional Input to trigger it. It is also possible to have a
single Input trigger more than one Output by just selecting the same Input again for the
additional Outputs. This can be is used for pressing multiple buttons on a game controller or
building up Control, Alt, or Shifted keycodes, where a single Input will trigger a combination of
outputs to send the desired key, or where more than one Input is triggering Shifted keycodes.
When used with the delay_on function, a sequence of button or key presses can be
27