Quadro T-D1018BV, Instruction Manual

Page: 8 / 58

4
ENGLISH
refer servicing to qualified service personnel:
a) when the power-supply is damaged; b) if liquid has been spilled
c) if the product has been exposed to rain or water ; d) if the product does
not operate normally ; e) if the product has been dropped or damaged in
any way (voids warranty) ; f) when the product exhibits a distinct change
in performance.
Heat : The product should be kept away from heat sources such as a
radiator, heat register, stove, or other products that generate heat.
Replacement Parts : Unauthorized substitutions when service this
product may result in fire, electric shock, or other hazards. Make sure
your service technician has used parts specified by the manufacturer.
Energy Save : To save energy, unplug the USB power adapter when not in
use. The USB power adapter does not have a power switch, so you must
unplug the USB power adapter from the electrical socket when not in use
to avoid wasting power. The device should remain close to the electrical
socket while charging.
File and Application Download : Files you download from the Internet
can include viruses that will damage your device. To reduce this risk, only
download files from sources you trust.
The descriptions in this manual are based on the default settings of your
device. The images and screenshots used in this manual may differ from
the actual product.
If the device receives an unstable power supply while charging, the touch
screen may not function. If this happens, unplug the USB cable from the
device.
The device may heat up while charging. This is normal and should not
affect your device’s lifespan or performance.
The Android logo, Google™, Google Maps™, Google Mail™, YouTube™,
Google Play™ Store and Google Talk™ are trademarks of Google Inc.
Wi-Fi®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi CERTIFIED™, and the
Wi-Fi logo are registered trademarks of the Wi-Fi Alliance
The tablet comes with a built-in rechrgeable
ba ery that should be charged fully prior to first
use. Connect the AC adapter to your Tablet via
the USB port on the side of the tablet or connect
USB cable from your PC on the USB port
(illustrated below). Disconnect the tablet when
its fully charged.
The battery which is initially 50% charged can be
used immediately.
Please fully charge/discharge the battery
(15%
or below) for the first three times to get
maximum capacity.
If the battery is completely discharged, please
allow the at least 10-15 minutes to recharge
prior to turning it on.
CHARGE THE BATTERY:
During charging, the battery indicator shows an
thunder icon. If the device is switched off during
the charge, there will still be a charge indication on the screen that
shows the
unit is still being charged. If the device is overused when the
battery is low, it might take some time to appear the charging icon.
During charging, the battery
, the device and the charger will get hot.
This is normal.
U nplug the charger from the AC electrical outlet and disconnect the
wiring between the tablet and the charger after charging.
Attention: Charge the phone in a well ventilated place in which the
temperature is from-10 ° C to +55 ° C. Use the charger provided by the
manufacturer only. The use of unconfirmed charger may lead to
dangers and violate the manufacturer's warranty clause.
USB
DC
CHARGE
or