![background image](http://html1.mh-extra.com/html/quadro/qtv/qtv_installation-manual_3385950025.webp)
23
TV
Remote Behavior
If the remote has been programmed to the TV and Audio Systems as described on the
previous page, the remote’s TV power button ( ) will control the TV power only.
This will not affect the powered state of the STB. The “all devices” power button
( ) will control the TV power as well as the STB and audio system power states
if remote has been fully programmed with TV and Audio system.
The “all devices” power button ( ) may be used in two ways while system is
fully powered on:
Short Press:
Will turn off TV / Audio System and put the STB into standby mode.
Long Press:
User will be prompted if they want STB to be powered down (non-
standby) mode. If
OK
is selected, the TV, Audio system, and STB will all be powered
down. The STB will be fully powered down and not be in standby mode.
NOTE:
To prevent the STB and the “all devices” power button ( ) user in
-
put reactions from becoming unsynchronized (i.e. the “all devices” power button
( ) turns the TV Off while turning the STB On, or vice versa) it is recommended
to use only Short Presses of the “all devices” power button ( ) .
If a Long Press of the “all devices” power button is used to Power Off the TV, it
MUST
be followed by a Long press to turn the TV back On. If a Long Press to turn
the TV Off is followed by a Short Press to turn TV On, the TV and STB may become
unsynchronized with the respect to being On or Off at the same time.
If the TV and STB become unsynchronized with respect to power button presses,
power cycle (i.e. Remove power) to the STB, while the TV is On. This will re-syn
-
chronize the TV and STB power.
Qtv 2020 | Installation Guide