21
TV / Remote Programming
By default, the remote controls the Volume on TV, and Power on the STB. To program
the remote to the TV, such that remote Master Power key presses adjust Power and
Volume on the TV by Infrared commands directly follow the instructions below:
•
Press and hold the key until the remote LED turns green.
•
Enter the 5-digit code as shown in
Appendix A
.
•
Successful programming is indicated by two green blinks of the LED.
•
Unsuccessful programming is indicated by two red blinks of the LED.
Audio System - Sound Bar / Remote Programming
By default, the remote controls the Volume on TV, and Power on the STB. To program
the remote to the Sound Bar, such that remote Master Power key presses adjust
Volume on the Sound Bar by Infrared commands directly, follow the instructions below:
•
Press and hold the key until the remote LED turns green.
•
Enter the 5-digit code as shown in
Appendix B
.
•
Successful programming is indicated by two green blinks of the LED.
•
Unsuccessful programming is indicated by two red blinks of the LED.
Ecosystem Setup Recommended for the Correct Audio Behavior
It is
strongly
recommended to program the KURV remote to allow the TV or Audio
System control the sound. This will ensure that any channels encoded with Dolby
Surround operate as expected. If the STB is allowed to control the sound, channels
encoded with Dolby Surround may render with no audio. Programming codes for
TV’s and Sound Bars/Systems are found in Appendices A and B.
NOTE:
When entering TV programming codes, ensure the code used has the
ability to control both Power and Sound. Some codes may control Power alone and
some Audio alone. Use the code that controls both Power and Sound to process
Dolby Surround as expected. When the TV code has been programmed, confirm
the volume key on the remote brings up the TV sound level indicator, NOT the STB
sound level indicator.
It is also
strongly
recommended that any TV sound leveling technology be disabled.
This technology is generally used to squelch advertisement audio that is increased
intentionally. This technology may cause unintended variations in sound levels.
Set
Set
Qtv 2020 | Installation Guide