ENGLISH
- 4 -
Fabric
Synthetic
Silk, wool
Cotton, linen
Temperature control
MAX
Temperature requirement
Low temperature
Medium temperature
High temperature
Steam ironing
•
Place the iron in the vertical position and set the temperature control dial to the minimum / low
heat setting.
•
Insert the plug into the socket, and then press the + temperature control dial to the high heat
setting. The pilot light will come on, indicating that the iron is heating up.
•
When the pilot light turns off, the set temperature has been reached and the iron is ready for use.
•
During ironing, the pilot light on the iron automatically switchs on / off as the thermostat maintains
the desired temperature (you may continue ironing as normally during that process).
•
Turn the steam control turning knob to the required position.
•
Steam is produced as soon as the iron is held horinzontally.
Spraying
•
Press the spray button to spray water on clothes, as often as required.
Note: When using the water spray function, ensure that there is enough water in the water tank, and
you may have to pump the spray button several times at first use in order to start the spraying
function.
Burst or vertical steam ironing
•
Press the burst of steam button to generate a powerful burst of steam that can penetrate the
fabrics and smooth the most difficult and tough creases. Wait for a few seconds before pressing
again.
•
By pressing the burst of steam button at intervals you can also iron vertically (curtains, hung
garments, etc.)
Note: The burst steam function can only be used at high temperature. Stop the emission when the
pilot light turns on, the start ironing again only after the pilot light has turned off.
Dry ironing
For ironing without steam, follow the instruction in the section “steam ironing”, however, the steam
control turning knob should remain in the position “0” (no steam).
Fabric and temperature indicator
Press on the electronic temperature control to select the desired fabric setting. The lights in the water
tank will light up, at the same time lights will start to flash, they will stop flashing when the iron
reaches the selected temperature.
Storage
•
After use, lift the iron with filling holes pointing downwards to empty the remaining water from the
water tank.
•
Insert the plug into the socket and set the temperature to MAX for 1-2 minutes to evaporate the
remaining water, then unplug the iron and let it cool down before storing it.