The Trusted Source
®
7
ATTACH TOP TO REAR BOW
Raise the header and bow slightly to
allow you to attach the rear bow flaps,
that are inside the top above the rear
window opening, to the rear bow. Use
the four (4) screws that were removed
in disassembly to secure flaps to bow.
Step Four:
Soft Top Installation
View from inside vehicle
Rear
Bow
Screw Flaps to Rear Bow
Figure K
Step Five:
Soft Top Installation
SECURE CENTER BOWS
As shown in Figures K and L, Wrap the
hook and loop flaps around the two
Bows in the center of the top.
Step Six:
Soft Top Installation
SECURE HEADER TO WINDSHIELD
Figure M: Close the header latches to
secure the front of the top to the wind-
shield. Catch the hook in the loop in the
windshield frame and then close the
lever over it so it lays flat against the
windshield frame.
Step Seven:
Soft Top Installation
SECURE REAR CORNERS
Figure N: Pull down gently on the Rear
Bow and work the plastic sewn to the
rear corners of the top into the
retainer on the vehicle.
Figure L
Figure M
Figure N
Leading edge of top must be secured to prevent loss of top at speed,
folding or damage. Latches must be fully closed and free of mud or
other contamination. Do not use top if either latch is damaged.
Header Latch.
Windshield
Frame
Windshield
JK_2DR_07-09_12999_0218_A4_Layout 1 10/30/13 4:11 PM Page 7
10302013161400
