The Trusted Source
®
5
Step Seven:
Soft Top Removal
REMOVE TOP FABRIC
Raise the bow assembly and lock the
header to the windshield. Drape the top
fabric, backing side up, over the hood
and windshield. Remove the nineteen
(19) screws that secure the fabric to the
upper and lower headers. Set the screws
aside for use in installing the new top.
Slide the extrusion along the front edge
of the top out of the channel in the
lower header and remove the old top
from the vehicle.
Above:
Top Fabric with backing side up.
Above:
Remove screws (19) across header.
Above:
Slide Extrusion along the front Edge of
the Channel to remove Top.
Important Note:
At this point of the instructions you
have successfully removed your old fab-
ric top from the factory bow assembly.
Please inspect all hardware before mov-
ing on to the installation of your new
QuadraTop Fabric Replacement Soft
Top. If any of your factory hardware is
damaged, view our list of replacement
parts on page 11 before installing your
new QuadraTop. If all your hardware is
in good condition, proceed to Page 6 for
the installation your new fabric top.
JK_2DR_07-09_12999_0218_A4_Layout 1 10/30/13 4:11 PM Page 5
10302013161359
