background image

20

Quadratec

®

Limited Warranty 

for QuadraTop Adventure

®

Top Premium Replacement Soft Tops

Your QuadraTop

®

Adventure Top replacement soft

top is covered by the following 

Limited Warranty

provided exclusively by Quadratec, Inc.,
1028 Saunders Lane, West Chester PA 19380.

This Limited Warranty is the only warranty made
in connection with your purchase. Quadratec
neither assumes nor authorizes any vendor,
retailer or other person or entity to assume for it
any other obligation or liability in connection with
this product or Limited Warranty. This Limited
Warranty does not apply and is not cumulative to
any accessory or part distributed by Quadratec
for which the Manufacturer provides a separate
written warranty. 

What is Covered: 

Subject to the terms, exclusions

and limitations herein and with respect only to
QuadraTop soft tops first sold in the United States,
Quadratec warrants to the initial retail purchaser
only that your QuadraTop soft top shall be free of
defects in material and workmanship: 

for a period

of 3 years from date of initial retail sale. 

All other warranties are hereby disclaimed, except
to the extent prohibited by applicable law in
which case any implied warranty of merchantabil-
ity or fitness for a particular purpose on this 
product is limited to 3 years from date of initial 
retail sale. Quadratec reserves the rights to: (a.) 
require invoice or other proof your soft top is
within the terms of this 

Limited Warranty 

as a

condition of warranty service and, (b.) make 
future revisions to this product and 

Limited

Warranty 

without prior notice or obligation to

upgrade your soft top.

What is Not Covered:

Your Quadratec 

Limited Warranty 

does not cover

products or parts Quadratec determines to have
been damaged by or subjected to: (a.) installation
damage, alteration, modification, failure to
maintain or attempted repair or service by anyone
not authorized by Quadratec, (b.) normal wear
and tear, cosmetic damage or damage from
water immersion, (c.) Acts of God, accidents,
misuse, negligence, inadequate mounting or
impact with vehicle(s), obstacles or other aspects
of the environment, (d.) theft, vandalism or other
intentional damage.

Remedy Limited to Repair/Replacement:
The exclusive remedy provided hereunder shall,
upon Quadratec inspection and at Quadratec’s 
option, be either repair or replacement of product
or parts (new or refurbished) covered under this
Limited Warranty. 

Customers requesting warranty

consideration on QuadraTop soft top should first
contact Quadratec to obtain a RGA number
(610-701-3336). All labor, removal, shipping and
installation costs are customer’s responsibility.

Other Limitations - Exclusion of Damages
- Your Rights Under State Law:

In consideration of the purchase price paid,
neither Quadratec nor any independent Quadratec
distributor/licensee are responsible for any time
loss, rental costs, or for any incidental, consequen-
tial, punitive or other damages you may have or
incur in connection with any part or product
purchased. Your exclusive remedy hereunder
for covered parts is repair/replacement as
described above.

This 

Limited Warranty 

gives you specific rights.

You may also have other rights that vary from
state to state. For example, some states do not
allow limitations of how long an implied warranty
lasts and/or do not allow the exclusion or
limitation of incidental or consequential
damages, so the limitations and exclusions
herein may not apply to you.

©Quadratec, Inc. 2020. All Rights Reserved.
6.16.20   LTR Version          Part 

#

12999.3162

The terms Quadratec

®

, QuadraTop

®

, Adventure

®

and Essentials

®

and are Registered Trademarks of

Quadratec Inc. Registered in U.S. Patent and
Trademark Office.

Q_TJ_ADV_11113.00XX_LTR_BU.qxp_QTOP  6/16/20  12:11 PM  Page 20

Summary of Contents for QuadraTop Adventure Top 1113.00 Series





















Reviews: