8
Step 12: Installing the top Deck (Continued)
Once lined up with the bow mount
bracket, install the header assembly by
pulling out the quick release knob and
push over the mount until you hear a
“click”(FIG45). Tighten the bow mount
brackets on the front door surround
with the
included 4mm allen wrench
(FIG45a). The
front header should now easily rest on top of
the windshield when folded down.
Repeat on the other side of the vehicle
.
FIG 45a
FIG 45
Bow mount brackets
Quick release
FIG 46
corner pockets
FIG 47
FIG 48
square
bracket
FIG 49
FIG 50
Before you fold down the header make
sure that the front two header corner
pockets are in place and not lifted up
over the header (Fig 46).
Slowly fold
down the front header
.
With the header resting on the wind-
shield, close the front header latches
to secure the front of the top to the
windshield. See FIG’s 47 & 48.
Locate the driver side square bracket
on the rear driver door surround as
shown in
F
ig 49. Secure the deck to
the
bracket by rolling the plastic into
the
slot on the bracket as shown in
F
ig
50.
Repeat on the other side of the vehicle.
Go inside the vehicle and locate the
front bow, center bow #1 and
center
bow #2 and the hook and
loop laps
sewn into the top deck
.
Wrap these
f
laps around the first,
sec
ond & third center bows securing
the top deck to the bows (FIG 54 &
55).
Center Bow #1
Center Bow #2
Front Bow
FIG 51
Front Bow
Center Bow #1
Center Bow #1
Center Bow #2
FIG 54
FIG 55
