6
Step 8: Installing the rear bow #1 to
the rear leg bracket
Locate the rear bow #1, (FIG27),
and the driver side rear leg bracket
#1(FIG26) installed from factory on the
driver side rear main bracket (FIG 22).
There are a pair of screws and nuts
installed on the rear leg bracket from
factory. Remove these screws and nuts
using a 10mm socket wrench and the
included 5mm Allen head tool and set
aside. (FIG 28)
Driver side rear leg
bracket #1
Passenger side rear
leg bracket #1
FIG 26
Rear Bow #
2
Rear Bow #
1
FIG 27
FIG 28
FIG 29
Rear Bow #1
Rear Bow #1
Driver side rear
leg bracket #1
FIG 30
Line up the driver’s side
mounted
rear
leg #1 to the rear bow #1. Insert the
screws and nuts and tighten using the
included
4mm Allen as shown in
Fi
g
29.
Fold the Rear Bow #1 and the rear leg
#1 to the front (FIG30).
Repeat on the other side of the vehicle
Step 9: Installing the rear leg #2 t
o
the rear main bracket
In the Driver’s
side rear main bracket, there is a
screw and nut installed from
Factory
(
F
ig 31). Remove this screw
and nut,
and set aside.
With the help of a friend carefully take
the top deck assembly out of the box
by grasping the rear legs #2 and bow
arms that are attached to the front of
the windshield header as shown in fig
32 and lay down on the back of the
Jeep.
FIG 31
Screw & Nut
Driver side rear main
bracket.
Driver side rear
leg #1
Driver side rear
leg #2
Driver side bow
arm
FIG 32
Make sure the holes of the rear leg #2
and main bracket line up (fig 33). Insert
the screw and nut previously removed
using a 10mm socket and the includ-
ed 4mm Allen head tool. Tighten and
secure the bracket (fig 34 & 35).
FIG 35
FIG 34
FIG 33
