background image

The Trusted Source

®

2

Before You Begin Installation: 

Congratulations on your purchase of the
Quadratec QRC Side Armor with Step
for your Jeep

®

Wrangler.

When unpacking, check to make sure all
parts are included and not damaged due
to shipping. If any part is missing or
broken, please call Customer Service
at 800-745-6037 as soon as possible.

Due to the length and bulk of these
heavy duty side steps, we strongly
suggest you get the help of a friend for
steps that involve lifting, locating or
holding the rocker guards during
installation.

Thank you again for your purchase
and let’s start the installation process.

AS YOU UNPACK YOUR SIDE STEPS, BE CAREFUL NOT TO SCRATCH THE
FINISH WITH A KNIFE OR RAZOR. WE SUGGEST PLACING THE UNPACKED
PIECES BACK INTO THE ORIGINAL BOX SO IT DOES NOT GET SCRATCHED
BEFORE THE INSTALLATION BEGINS. IT IS HIGHLY RECOMMENDED THAT
A SECOND PERSON ASSIST WITH THE INSTALLATION OF THESE ROCKER
GUARDS. 

A hazardous situation which, if not avoided, could result in death or
serious  injury.  You  CAN  be  KILLED  or  SERIOUSLY  HURT  if  you  don’t
follow instructions.

A  hazardous  situation  which,  if  not  avoided,  could  result  in  minor  or
moderate  injury.  You  CAN  be  moderately  HURT  and  also  may  suffer
property damage if you don’t follow instructions. 

Careful attention is required to this instruction or operation but does
generally  not  relate  to  personal  injury.  Damage  to  your  Quadratec

®

product or other property may result if you don’t follow instructions. 

These custom fit rocker guards with
steps have been designed for long life
and great looks. With proper care, they
are designed to provide years of use.

Please see page 7 in this instruction
booklet for all suggested care for your
product.

Product Care and Maintenance:

A Few Words About Product Safety: 

Your Side Armor with Step is designed
to enhance the utility and enjoyment of
your off road capable vehicle. Before 
installation, please take a moment to 
review the following safety information 

and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.  
The signal words mean:

QRC_SIDE_ARMOR_JL4dr_12004_3214.qxp_Layout 1  10/16/18  2:13 PM  Page 2

Summary of Contents for QRC









Reviews: