®
4
(FIG7) Align the bracket and Tighten all
hardware to 6ft-lbs.
Repeat for Driver side bracket.
(FIG8) Using the T40 Torx bit socket
loosely fasten the A-Pillar bracket to the
cowl. Repeat the previous step for the
front mount
(FIG7) To Install the A-Pillar bracket
insert J) M8 hex screw through the rear
mounting hole while placing the H)
10mm spacer on the other side of the
bracket.
(FIG6)
Installing Cube lights with
A-Pillar brackets
With a 5mm hex bit driver and 13mm
box wrench loosely assemble the Cube
light bracket to the A-Pillar bracket
Using a E), F), G) hardware.
FIG6
FIG7
FIG8
FIG7
