®
3
Bracket Installation:
Put on safety glasses. (FIG 1) Using a
3/8" box wrench unscrew the antenna.
FIG1
(FIG2) Using a T50 Torx bit socket
remove the windshield hinge screw
.
(FIG3) Using a T40 Torx bit socket
remove the 4 Cowl mounting screws
and carefully remove the Cowl.
(FIG4) Run the wiring for the cube lights
and light bar then re-install the Cowl.
Using a T40 Torx bit socket loosely
install the 2 top Cowl mounting screws
.
Repeat these steps for the driver side of
the vehicle.
FIG2
FIG3
FIG4
ALWAYS CHECK LIGHTING FUNCTIONS AFTER INSTALLATION.
DO NOT DRIVE ON PUBLIC ROADS WITH COWL LIGHTS ON AS
THIS IS ILLEGAL IN SOME STATES AND JURISDICTIONS.
(FIG6)
To delete Cube light brackets:
If you are not using the B),D) Cube light
brackets Insert L) 1/2" Plastic Sheet
Metal Plugs into the Cube light bracket
mounting holes.
FIG6
