4
The Trusted Source
®
Now plug one end of the “Y” harness
into the back of the factory brake light.
Once again make sure the connectors
fully engage and lock together.
Route and secure the “Y” harness into
the channel on the backside of the brake
light. Use the same routing and securing
clips that the factory harness used.
Connect the other end of the “Y”
harness to the brake light ring harness.
Remove factory brake light from the
housing and unplug the factory connec-
tor from the back of the brake light.
Plug the supplied “Y” harness into the
factory harness as shown. Make sure
the connectors fully engage & lock
together.
Factory
Harness
“Y” Adapter
Harness
Installation Instructions:
WHEN ROUTING ELECTRICAL WIRES, ALWAYS AVOID PINCHING WIRES.
ALWAYS AVOID HOT OR MOVING COMPONENTS. ALWAYS SECURE WIRES
WITH CABLE TIES.
RING_OF_FIRE_A4.qxp_A4 1/18/18 12:19 PM Page 4
01182018122049
