background image

QuadraTop

®

 

Adventure Top

 

With F

lip

 Back Sunroof

for 2007-2018 

2 Door Jeep

®

 Wrangler JK

 

Item 

#

11113.1

4

35

Loss of vehicle control involves risk of death or serious injury, particularly to 
parts of your body not restrained within vehicle. This product is intended for 
weather protection only and should not be relied upon to contain occupants 
in the event of an accident or to protect from either ground contact or falling 
objects. To reduce risk of accident or injury:

ALWAYS 

WEAR 

SEATBELTS

Always keep head, arms & body parts within vehicle.

Fully secure or stow the soft top before driving according to instructions.
Never try to latch or fold soft top while driving. Do not use if damaged or
worn.

Read and follow all instructions & warnings accompanying this product, in
your vehicle owner’s manual and Off Road Driving Supplement.

RISK OF EYE INJURY. Safety glasses should be worn at all times while insta-
lling or maintaining this product.

PART LIST:

TOP DECK/HEADER ASSEMBLY 

QTY 1 

DRIVER SIDE QUARTER WINDOW 

QTY 1 

PASSENGER SIDE QUARTER WINDOW 

QTY 1 

REAR 

WINDOW

QTY 

1

DRIVER SIDE OVER DOOR BOW 

QTY 1

PASSENGER SIDE OVER DOOR BOW  

QTY 1 

CENTER BOW ASSEMBLY   

QTY 1

DRIVER’S SIDE DOOR SURROUND 

 

QTY 1

PASSENGER SIDE DOOR SURROUND 

QTY 1 

DOOR SURROUND KNOBS   

QTY 4

ROLL BAR BOW MOUNT BRACKETS   

QTY 2 

REQUIRED TOOLS:

 

SAFETY GLASSES 
PHILLIPS SCREW DRIVER 
FLAT HEAD SCREW DRIVER

 

T-

30

 TORX DRIVER

PLIERS

This Replacement Top kit is designed to fit on your 2 Dr Jeep® Wrangler when 

the original soft top or hard top has been completely removed. Before begin-
ning your installation of this product, you will need to remove your existing soft 
top fabric, hardware or Hard top.

WARNING

CAUTION

NOTICE

Summary of Contents for 11113.1435















Reviews: