R
Page 14
October 13, 2015
Yosemite Wood Stove
7004-187L
D. Leg Leveling System
Figure 14.3 - Bolt fully extended
Figure 14.2
Figure 14.1
1. Thread Allen bolts through nuts until fl ush.
Figure 14.1.
The Allen bolts and nuts are included in the component pack
inside the appliance fi rebox.
2. Slide assembled nuts and bolts into slots on legs with the
nuts on the bottom.
Figure 14.2
. Use a 5/32 Allen wrench
to adjust legs up and down to desired level.
Figure 14.3.
E. Side Fuel-Loading-Door Locking
Mechanism
The side fuel loading door is shipped locked in place.
Figure
14.5
You must fi rst decide where you are locating your stove and
determine if you meet the minimum required clearances
from combustibles for loading wood into the fi rebox from
the side door.
If you do not meet the clearances found on
page 10
, leave the
door locked in place. If you unlock the door without meeting
the minimum required clearances
YOU WILL VOID YOUR
WARRANTY AND ASSUME ALL RESPONSIBILITIES.
If you meet the minimum clearances, follow the instructions
to unlock the door.
If in the future you decide to relocate your stove, again
determine if you meet the mimimum required clearances
to combustibles in the new location. If you do not, you are
required to lock the door shut and it must remain locked at
all times.
Door Locking
Bracket
Screw
Instructions To Unlock Side Fuel Door
1. Open front door.
2. Using a Phillips head screwdriver, remove the screw
from the locking bracket.
Figure 14.4.
3. Rotate locking bracket to horizontal position and secure
in place using the same screw.
Figure 14.5
Figure 14.4
Locked Position
Bracket in Vertical
Position
Bracket
Unlocked Position
Bracket in Horizontal
Position
Bracket
Figure 14.6