background image

1

04/21

7019-802H

NOTICE: DO NOT DISCARD THIS MANUAL

R

SANTA FE PELLET INSERT 

APPLIANCE 

MODEL NUMBER:

SANTAFEI-C

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

Contact your dealer with questions on installation, operation, or service.

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

Tested and approved for wood pellets only. Burning of 

any other type of fuel voids your warranty. 

CAUTION

CAUTION

Check building codes prior to installation.

•  Installation MUST comply with local, regional, state 

and national codes and regulations.

• 

Consult local building, fire officials or authorities 

having jurisdiction about restrictions, installation 

inspection, and permits.

WARNING

If the information in these instructions is 

not followed exactly, a fire could result 

causing property damage, personal injury, 

or death.

• 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

• 

Do not over fire

 - If appliance or chimney connector 

glows, you are over firing. Over firing will void 

your warranty.

•  Comply with all minimum clearances to combustibles 

as specified.

Failure to comply may cause house fire.

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down. Hot glass will 

cause burns.

WARNING

•  Do not touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room 

as fireplace.

•  Alert children and adults to hazards of 

high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other 

flammable materials away.

NOTE:

 To obtain a French translation of this manual, 

please contact your dealer or visit 

www.quadrafire.com

REMARQUE :

 Pour obtenir une traduction française de ce 

manuel, s’il vous plaît contacter votre revendeur ou visitez 

www.quadrafire.com

Summary of Contents for SANTAFEI-C









































Reviews: